FoilMount ridge foil

Not yet rated Write a review
Availability:
In Stock - In Store
Product Code:
FoilMount ridge foil
Available Stock:
2
£159.00

Standard FoilMount

The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have.  

The FoilMount uses a specially designed 3M adhesive tape to stick to the bottom of your board.  It will accommodate any foil that uses the 90mm track system (this is industry standard). It’s an easy way to fix a broken track system.  It is also great for retrofitting boards with through bolt holes to give them the adjust-ability of a sliding track system. The FoilMount can be removed but cannot be reused.  It is very easy to install, just prep the surface with alcohol, peel the tape backing, and stick! Make sure you install the FoilMount on a flat surface on the board (no rocker, double or single concave).

Ridge Mount FoilMount
This is the standard mount with a relief cut down the middle allowing for a mount on top of a ridge on the bottom of the board. The surface still needs to fairly flat, but allows for a slight ridge where the FoilMount will be installed.  It is suitable for most SUP boards, hydrofoil boards, Skim boards, Surfboards. If you have any questions about mounting compatibility email us at [email protected] 

The 2.0 Standard now includes:

-Upgraded FoilMount plate with one piece adhesive backing

-4 high strength brass slider nuts

-1 set of 4 flat head M8x16mm bolts for Slingshot and most other foils

-1 set of 4 flat head M6x12mm bolts for Takuma Surf hydrofoils

-1 set of 4 pan head M8x20mm bolts for Moses and older Liquid Force foils 

(instructions, alcohol pads, scotch-brite pad, FoilMount box)

For more videos check out our youtube channel here: FOIL MOUNT INSTALLATION

Advice for mounting FoilMounts from customer questions:

Answer for "Scott":

That Liquid Force Wake Surf board has a PU (poly urethane) coating which will make a medium strength bond with the VHB adhesive tape in the FoilMount, I’d recommend using the 3M 94 primer before mounting.  As far as position, make sure that the mounting area is absolutely flat number one. If you have a ridge down the middle of the board and are using the ridge mount, make sure both sides of the ridge are flat (no concave or big enough for flat mounting with ridge).  The best way to do this is to "dryfit" a FoilMount in the mounting location and make sure it fits tight to the board. In terms of position I’ve found that you want your rear foot either directly over the mount or slightly to the rear of the mount so your thinking was on track.  You can get the 3M 94 primer pretty much anywhere adhesives or paint is sold…we also have it on our website. Hope that helps!

BREXIT

We at THE SUP HUT want to be transparent;

The UK have now left Europe, orders leaving the UK for the EU, will exclude UK VAT at 20%

However please be aware if ordering from EU you may be liable for import VAT of your country. Please budget for these costs - THE SUP HUT is not responsible for these charges if they are due. Once we have sent your order, if you reject these importation charges -  you will receive the full refund for the item when it is returned to us minus the total shipping and returns costs.

All items listed as 'In stock in store' are priced as listed.
Items listed as 'Pre order' or 'in stock to order' may incur increases and we reserve the right to pass these over to you.

Delivery Information

We recommend picking up SUP boards in person

The shipping / postage of your item(s) will be automatically calculated based on weight/size. (in some cases ie Highlands of scotland, there may be an additional surcharge)

We use Royal Mail for small items and TNT for larger items which require a signature at time of arrival.

FREE UK SHIPPING - This applies on some items and is sometimes displayed - however this is only for U.K orders and Excludes Scottish Highlands & Europe.

Please note If postage is not calculated there may be a problem with your order / In the case of a change of delivery price, we will always contact you first to ensure that the price is acceptable. POSTAGE IS FOR U.K MAINLAND ONLY.

We will not accept any liability for any damaged goods if the DELIVERY is not signed for as ‘DAMAGED’

We can offer shipping to Europe - Please contact us for a quote 

Carver Skateboards - We can offer E.U shipping of carver skateboards send us a message.

Click to read our full Delivery Terms & Conditions.

Stock Availability Information

What do our Stock Statuses mean?

In Stock - In Store = Available to buy now & collect in store or buy online now for delivery.

In Stock - To Order = Available but allow an additional 3-5 days for delivery or collection.

Pre-Order = This product needs to be ordered from our supplier and will only be ordered once a pre order is made. Or we've made an order from our supplier and stock is due to arrive at some date in the future, this date will be communicated where possible on product the page.

Out Of Stock = This product is no longer available, or we are waiting for a confirmed date for when new stock will arrive.

We reserve the right to refund your purchase should stock not be available to ourselves at the time of ordering.

Write a review